Brisket has a reputation for being hard, and it earned it. It's two muscles stuck together, with a fat cap on one side and a lot of connective tissue in between. Cook it too hot and the flat dries out before the point gets tender. Pull it too early and you're slicing shoe leather for twelve people who skipped lunch.
None of that takes magic. It takes a steady fire, a good thermometer, patience through the stall, and knowing the difference between done-safe and done-tender. Here's the whole thing, start to finish, with a printable card at the bottom.
Step 1: Pick the brisket
- Whole packer: both muscles, the leaner flat and the fattier point, with the fat cap on. This is what we're cooking. Most run 12 to 16 pounds.
- Flat only: easier to find in a grocery case and quicker to cook, but leaner and easier to dry out.
- What to look for: bend it in the package. A packer that flops over your hand usually has a thicker, more even flat. Look for some white marbling in the flat.
Step 2: Trim
Trim with the brisket cold, straight from the fridge. Cold fat cuts clean.
- Trim the hard fat (the white, waxy kind that doesn't render) down to about a quarter inch on the fat cap.
- Round off thin edges and corners. They'll burn before the middle is ready.
- Trim the big fat seam between the point and flat on the underside, but don't separate the muscles.
- Save the trimmings for tallow or the grinder.
Step 3: Season
Central Texas style is salt and coarse black pepper. Plenty of Southern cooks add garlic. Use the rub on the card, or your own. Season every side heavily enough that you can barely see meat through the pepper. You can season the night before and refrigerate it uncovered, or right before it goes on.
USDA's rule for anything that sits: marinate or hold raw meat in the refrigerator, never on the counter. 1
Step 4: Build a steady fire
- Temperature: USDA FSIS says to keep a smoker's air temperature between 225°F and 300°F the whole cook. 1 Texas A&M's meat science program says big cuts like brisket cook best low and slow at 200 to 250°F, so the outside doesn't overcook before the middle comes up. 2 Most cooks run brisket somewhere between 225°F and 275°F. Pick a number in that window and hold it.
- Wood: Texas A&M names hickory, oak, pecan, and mesquite as the four main Texas woods. 2 Oak is the classic brisket wood. Hickory and pecan are at home here in the South. Use clean, seasoned hardwood only. FSIS warns against treated or improvised materials. 1
- Two thermometers: FSIS says you need one for the smoker and one for the meat. 1 A leave-in wireless probe for the meat and the grill's own controller (or a separate pit probe) does the job. See our wireless thermometer roundup.
Fat side up or down? It's a long-running argument. Fat side toward the heat source shields the meat on cookers with direct heat from below. Fat side up is common on cookers with even heat. Go by where your cooker's heat comes from.
Step 5: Ride out the stall
A couple hours in, the internal temperature climbs steadily, then stops, usually somewhere around 150°F to 170°F, and sits there for hours. It's normal. It isn't broken.
What causes it:
- Texas A&M says the plateau comes from evaporative cooling. 3 Moisture on the surface evaporates and cools the meat, the same way sweat cools you.
- AmazingRibs' write-up of physicist Greg Blonder's experiments says the same thing. It notes the stall usually shows up around 150°F and depends heavily on airflow. 4
- It isn't caused by fat rendering or collagen melting, though people blamed those for years.
What to do:
- Wait it out. You'll get the deepest bark.
- Or wrap it in butcher paper or foil once the bark is set and dark, usually right around the stall. Wrapping traps the moisture so it can't evaporate, and the temperature starts moving again. 4 Foil pushes through fastest but softens the bark. Butcher paper is a middle road.
- Don't crank the heat to rush it. That's how the flat dries out.
Step 6: Know the two temperatures
This is where a lot of brisket goes wrong. There are two different numbers:
Done-safe: 145°F plus a 3-minute rest. USDA FSIS sets this as the safe minimum internal temperature for beef roasts like brisket, measured before you take it off the heat. 5 Your brisket passes this hours before it's tender.
Done-tender: much higher, and you go by feel. Texas A&M says brisket's connective tissue (collagen) converts to gelatin at roughly 185°F to 195°F internal, and that's what makes it tender. 3 AmazingRibs points to about 203°F as the mark where it's most tender. 4 Temperature is the guide, but the real test is feel. Push a probe or skewer into the thickest part of the flat. When it slides in like warm butter with almost no resistance, it's ready. Some briskets get there at 198°F, others at 205°F.
Plan on about an hour per pound. That's Texas A&M's general rule at low-and-slow temperatures. 2 Add time for the rest, and give yourself a cushion. It's easier to hold a finished brisket than to rush one.
Step 7: Rest it, and hold it safely
- Rest: at least an hour, wrapped, before slicing. Longer is better. The juices settle and the bark firms up.
- Hold: to hold longer, keep it at 140°F or above. USDA's "Danger Zone," where bacteria multiply, is 40°F to 140°F. 1 A clean, dry cooler with towels, or a low oven or smoker setting, holds a wrapped brisket hot for hours. Check it with a thermometer.
Step 8: Slice
- Order: slice the flat first. Then separate the point from the flat along the fat seam.
- Direction: cut against the grain, about the thickness of a No. 2 pencil. The grain runs differently in the point and the flat, so turn the point 90 degrees before slicing it.
- The point: slice it thicker, or cube it for burnt ends.
- Timing: only slice what you're about to serve. Sliced brisket dries out fast.
Step 9: Leftovers
FSIS says to:
- refrigerate smoked meat within 2 hours of taking it off the smoker, in shallow containers, and use it within 4 days or freeze it 1
- reheat leftovers to 165°F 5
Brisket chili, tacos, and hash all count as "use it."
Recipe card: Smoked Brisket
Smoked Brisket (Whole Packer)
Yield: 12 to 20 servings, depending on trim
Prep: 45 minutes (trim and season)
Cook: about 1 hour per pound at 225–275°F (planning guide only, per Texas A&M) 2
Rest: 1 to 2 hours, held at 140°F or above
Cooker: smoker, pellet grill, offset, or kamado set up for indirect heat
Safe internal temp: 145°F, then rest at least 3 minutes, measured in the thickest part before removing from heat (USDA FSIS, Safe Minimum Internal Temperature Chart, beef roasts). 5 Tender brisket finishes higher, by feel (see Step 6). See all safe internal temperatures.
Ingredients
- 1 whole packer brisket, 12–16 lb
- 1/2 cup coarse kosher salt
- 1/2 cup coarse ground black pepper (16 mesh if you can find it)
- 2 tablespoons granulated garlic (optional)
- Clean, seasoned hardwood or pellets: oak, hickory, or pecan
- Pink butcher paper or heavy foil, for wrapping (optional)
Instructions
- Trim the cold brisket. Get the hard fat down to about 1/4 inch on the cap, round off the thin edges, and trim the seam fat underneath.
- Mix the salt, pepper, and garlic. Season every side heavily. Refrigerate until the cooker is ready, uncovered overnight if you have time.
- Bring the smoker to a steady 225–275°F, and keep it between 225 and 300°F the whole cook.
- Put the brisket on, fat side toward the heat source, and insert a leave-in probe into the thickest part of the flat.
- Cook undisturbed until the bark is set and dark and the internal temperature stalls, usually around 150–170°F.
- Optional: wrap tightly in butcher paper or foil and return it to the cooker.
- Keep cooking until the flat is probe-tender: a probe slides in like warm butter. That's usually somewhere past 195°F internal. It has passed the 145°F safety minimum long before this point.
- Rest, wrapped, for at least 1 hour. To hold longer, keep it at 140°F or above.
- Slice the flat against the grain about pencil-thick. Separate the point, turn it, and slice or cube it.
- Refrigerate leftovers within 2 hours and use them within 4 days, or freeze them. Reheat to 165°F.
Notes
- Cook times are planning ranges, not a doneness test. Always go by thermometer and feel.
FAQ
What temperature is brisket done?
It's safe at 145°F with a 3-minute rest (USDA FSIS). It's tender much later, usually somewhere past 195°F, when a probe slides in with almost no resistance. Texas A&M puts collagen conversion at about 185–195°F.
How long does a brisket take to smoke?
Plan on about an hour per pound at low-and-slow temperatures (Texas A&M), plus 1–2 hours of rest. Start early. A finished brisket holds well.
Should I wrap my brisket?
You don't have to. Wrapping in paper or foil around the stall speeds things up and keeps it moist. Leaving it bare gives the firmest bark. Both make good brisket.
Why did my brisket stop climbing at 160°F?
That's the stall. Evaporative cooling is holding the temperature flat. Keep the fire steady, or wrap.
Can I smoke a brisket on a pellet grill?
Yes. Set it in the 225–275°F range. For more smoke flavor, many cooks start lower for the first few hours. See our pellet grill roundup.
Sources
- USDA FSIS, "Smoking Meat and Poultry," last updated Aug. 13, 2024. https://www.fsis.usda.gov/food-safety/safe-food-handling-and-preparation/food-safety-basics/smoking-meat-and-poultry (checked Nov. 20, 2026)
- Texas A&M University Meat Science, "Cooking and Smoking Barbecue." https://meat.tamu.edu/texas-bbq/cooking-and-smoking/ (checked Nov. 20, 2026)
- Texas A&M University Meat Science, "Barbecue Science." https://meat.tamu.edu/texas-bbq/bbq-science/ (checked Nov. 20, 2026)
- Meathead, AmazingRibs.com, "What Causes The BBQ Stall: It's Not What You Think," last modified July 20, 2026. https://amazingribs.com/more-technique-and-science/more-cooking-science/understanding-and-beating-barbecue-stall/ (checked Nov. 20, 2026)
- USDA FSIS, "Safe Minimum Internal Temperature Chart," last updated Apr. 14, 2025. https://www.fsis.usda.gov/food-safety/safe-food-handling-and-preparation/food-safety-basics/safe-temperature-chart (checked Nov. 20, 2026)