Research-based roundup. We haven't used these probes. Everything below comes from the makers' published specs and announcements and from reputable reporting, with a link to each source.
A wireless probe goes in the meat, rides along for the whole cook, and texts your phone when it's getting close. It's the best way to watch a brisket from the couch. It's no substitute for checking the thickest part with a good instant-read before you pull it. USDA FSIS is clear that doneness for safety is measured with a food thermometer, and the minimums are in its chart. 1
The newest probes came out this fall. Here they are newest first.
Newest wireless probes, as of Nov. 20, 2026
| Probe | Maker's date | Connection | Sensors (maker) | Max internal / ambient (maker) | Battery per charge (maker) | Maker-listed price |
|---|---|---|---|---|---|---|
| ThermoWorks RFX MEAT Mini | Debuted Oct. 29, 2026 (Engadget) | 433 MHz radio to the required RFX Gateway, which handles Wi-Fi | 4 | 212°F / 1,000°F | Up to 48 hrs | $99 regular (sale price showing Nov. 20) |
| Combustion Predictive Thermometer, 2nd gen | "Ships November 2026" (maker) | Bluetooth, with Wi-Fi through a Booster, Display, or Giant Grill Gauge | 8 | 900°F max rating (maker) | 94 hrs | Kits from $199 |
| ThermoWorks RFX MEAT (full size) | Already on sale (for comparison) | 433 MHz radio to the RFX Gateway | 4 | 212°F / 1,000°F | 65+ hrs | $99 regular |
| MEATER Pro Duo | Launched Nov. 1, 2024 | Built-in Wi-Fi and Cloud | 5 internal + 1 ambient per probe | 221°F / 1,000°F | 24+ hrs | $199.95 at launch |
Specs and prices are as each source stated them when we checked on Nov. 20, 2026. Several were on Black Friday sale, so confirm before you buy.
ThermoWorks RFX MEAT Mini
Debuted Oct. 29, 2026. That's Engadget's report date. ThermoWorks emailed customers about it on Oct. 28. 2,3
The Mini is a shorter version of ThermoWorks' RFX MEAT probe, made for cuts too thin for the full-size one: steaks, chicken breasts, fish fillets.
The maker's specs: 4
- Size: 4.0 inches long, 0.21 inches thick, tapering to 0.11 inches.
- Sensors: four independently calibrated thermistors. ThermoWorks says the probe reports the lowest reading.
- Accuracy: ±0.9°F from 14 to 212°F.
- Heat rating: the exposed end is rated to 1,000°F.
- Battery: up to 48 hours. It charges 0–80% in 10 minutes from a charging block that runs on one AAA, good for 175+ charges.
- Waterproofing: rated IP69K, and dishwasher safe.
Fit: Engadget reports a minimum insertion depth of 2.36 inches. The full-size RFX MEAT needs 3.15 inches. 2
How it connects: it doesn't use Bluetooth or Wi-Fi. It talks on 433 MHz radio to the RFX Gateway, which you must have, and the Gateway connects to Wi-Fi and the ThermoWorks app. ThermoWorks rates the probe-to-Gateway range at 1,500 feet line of sight. The Gateway also takes a wired air probe for pit temperature, and one Gateway supports up to 50 RFX probes. 4
Price: $99 regular price on thermoworks.com, with a Black Friday price showing when we checked. 4
Who it's for: anyone already on RFX who wants a probe for steaks and fish, or a pellet or offset cook who's tired of Bluetooth dropping out through thick steel.
Combustion Predictive Thermometer, 2nd generation
"Ships November 2026," per Combustion's site. We couldn't find an original announcement date, so that's the date we use. 5
The maker's specs: 5
- Sensors: eight, spread evenly along the probe. Combustion says it finds the coldest spot.
- Heat rating: 900°F max.
- Size: 4.8 mm diameter.
- Accuracy: ±0.4°F sensor accuracy.
- Battery: 94 hours of cook time per charge.
- Range: the second-gen probe transmits Bluetooth at +8 dBm, with an unobstructed range rated at 330 feet.
Wi-Fi accessories: to get Wi-Fi, you pair it with one of three, each priced as a kit with the thermometer. 5
- WiFi Booster ($199 kit). The Booster alone is $89, and it can recharge a thermometer up to 16 times. 6
- WiFi Display ($229 kit).
- WiFi Giant Grill Gauge ($298 kit). It replaces your grill's dial thermometer.
All three work with first- and second-gen thermometers. Each one supports up to four probes. Changing a target temperature still needs a local Bluetooth connection. 5
Will the Giant Grill Gauge fit your grill? Combustion lists these requirements: 5
- a thermometer hole of 5/32 to 1/4 inch
- a flat mounting area 4.3 inches across
- 2.5 inches of clearance around the mount
- an adapter plate on some ceramic grills
About "SafeCook": Combustion says its app tracks time and temperature and can call food safe below the usual numbers. Its example is chicken held at 150°F for about 3 minutes. 5 That's the maker's claim. Our recipe cards stick to the USDA FSIS minimums: 165°F for all poultry, 145°F plus a 3-minute rest for whole cuts of beef and pork. 1
ThermoWorks RFX MEAT (full size), for comparison
Same system as the Mini, with a longer probe. Engadget lists it at 4.7 inches. ThermoWorks rates the battery at 65+ hours on a full 20-minute charge. Price is $99 regular. 2,4 Pick it for briskets, butts, and turkeys. The Mini is for thin cuts.
MEATER Pro Duo
Launched Nov. 1, 2024. That's older than the two above, but it's MEATER's newest product we could confirm with a dated release. (MEATER's maker, Apption Labs, has been owned by Traeger since July 2021.) 7
The maker's specs: 7
- Probes: two in one charger, each with five internal sensors and one ambient sensor.
- Heat rating: internal up to 221°F, ambient up to 1,000°F.
- Wi-Fi: built into the charger, and the release says that gives it "unlimited" Wi-Fi and Cloud range.
- Battery: 24+ hours, and a 5-minute charge gives about 2 hours.
- Cleanup: waterproof and dishwasher safe.
Price: $199.95 at launch, on MEATER.com. 7
Radio, Bluetooth, or Wi-Fi: what the words mean
- Bluetooth is short range, and steel lids, foil, and walls cut it down. Combustion's own site says walls, metal, and foil reduce range. 5
- Wi-Fi lets you check from anywhere you have internet. In these systems, the probe itself almost never talks Wi-Fi. A base station or charger relays the signal.
- Sub-1 GHz radio (ThermoWorks RFX, 433 MHz) gets through thick metal better, according to ThermoWorks and Engadget. You need the Gateway, though. 2,4
Why the "ambient" reading on a probe can fool you
A sensor at the back end of a probe sits right next to cold, wet meat, so it can read lower than the actual pit temperature. ThermoWorks makes that case for using a separate wired air probe on its Gateway. 4 For long cooks, a dedicated pit probe or the grill's own controller reading is the better number to trust.
Quick picks by need
These picks are matched to published specs, not to hands-on use.
| If you need… | Look at | Why (from the specs) |
|---|---|---|
| Thin cuts: steaks, fish, chicken breasts | RFX MEAT Mini | 2.36-inch minimum insertion depth |
| Signal through a thick offset or pellet barrel | RFX system | 433 MHz radio, 1,500-ft rated range to Gateway |
| The most sensor data and the longest battery | Combustion 2nd gen | 8 sensors, 94 hours |
| Two probes and Wi-Fi in one box | MEATER Pro Duo | Wi-Fi built into the charger |
Keep an instant-read, too
A leave-in probe tells you when to check. An instant-read tells you whether it's done, in the thickest part and in more than one spot. Our meat thermometer guide covers instant-reads, and how to calibrate one keeps it honest.
FAQ
Do I need Wi-Fi, or is Bluetooth enough?
If you'll stay within about one room or one porch of the cooker, Bluetooth with a relay is fine. If you want to check from town or the deer stand, you need a Wi-Fi base station.
Can I leave a wireless probe in a 500°F grill?
Only up to the maker's rating, and only with the probe inserted to its minimum depth so the electronics stay inside the meat. The ratings above are the makers' numbers.
Is time-at-temperature cooking safe?
Food scientists do use time and temperature together, but USDA FSIS publishes minimum internal temperatures for home cooks. Those are what we put on every recipe card: safe internal temperatures. 1
Which is best for brisket?
Any of the full-length probes. Brisket is thick enough for all of them. See our brisket guide.
Did you test these?
No. This is a research-based roundup from maker specs and reporting.
Sources
- USDA FSIS, "Safe Minimum Internal Temperature Chart," last updated Apr. 14, 2025. https://www.fsis.usda.gov/food-safety/safe-food-handling-and-preparation/food-safety-basics/safe-temperature-chart (checked Nov. 20, 2026)
- Engadget, Billy Steele, "ThermoWorks debuts shorter version of its RFX Meat wireless probe for small cuts," Oct. 29, 2026. https://www.engadget.com/2301085/thermoworks-debuts-shorter-version-of-its-rfx-meat-wireless-probe-for-small-cuts/ (checked Nov. 20, 2026)
- ThermoWorks email, "Introducing: RFX MEAT Mini," Oct. 28, 2026, archived by Milled. https://milled.com/thermoworks.com/introducing-rfx-meat-mini-H0JBsNk_Az9HkKDv (checked Nov. 20, 2026)
- ThermoWorks, "RFX MEAT Wireless Probe" product page and specifications. https://www.thermoworks.com/rfx-meat/ (checked Nov. 20, 2026)
- Combustion Inc., home page and Predictive Thermometer kit details. https://combustion.inc/ (checked Nov. 20, 2026)
- Combustion Inc., "WiFi Booster." https://combustion.inc/products/wifi-booster (checked Nov. 20, 2026)
- MEATER (Apption Labs) via PR Newswire, "...the New MEATER Pro Duo," Nov. 1, 2024. https://www.prnewswire.com/news-releases/achieve-perfect-cooking-results-every-time-with-dual-probe-precision-and-unlimited-wi-fi-range-of-the-new-meater-pro-duo-302293595.html (checked Nov. 20, 2026)